Converter Design Studiopower-stage design · component selection · losses
Calculating…

3-Level Flying-Capacitor Buck Calculator

The 3-level flying-capacitor buck uses four switches and a flying capacitor held at Vin/2. Each switch blocks only half the input voltage, and with phase-shifted PWM the inductor sees half-voltage steps at twice the switching frequency. The inductor ripple is therefore about a quarter of a two-level buck with the same inductance, so the inductor can be much smaller.

What you get

How to use it

  1. Enter your specification in the left panel: input range, output voltage, power and switching frequency.
  2. Results update instantly. Use the tabs to inspect waveforms, the chosen parts, magnetics and losses.
  3. Override any automatically chosen part, or import your own from a datasheet.
  4. Save the design as a file, print it, or export the BOM.

Results are engineering estimates. They use typical datasheet values and first-order switching models, and they do not replace simulation, the manufacturers’ datasheets or prototype testing. The equations used are listed under “Equations & Methods”.

All converter calculators

← Converter Design Studio home