Boost PFC Calculator
The CCM boost PFC shapes the input current into a sine wave while regulating a DC bus, typically about 400 V. The inductor is evaluated across the whole line cycle and can be interleaved. The bulk capacitor is sized for hold-up time and 2·fline ripple: C ≥ 2·P·thold/(Vbus² − Vmin²).
What you get
- Automatic part selection from a vendor-neutral library: MOSFETs (Si, SiC, GaN), IGBTs and modules, diodes, thyristors, ferrite and powder cores, and capacitors.
- Losses broken down into conduction, switching, gate drive, core, copper and capacitor ESR, with junction temperatures and efficiency at low, nominal and high input.
- Exact switching waveforms, input and output ripple, and harmonic spectra.
- Magnetics design: core, material, turns, air gap, wire or Litz, core loss (iGSE) and winding loss (Dowell).
- Design sweeps, control-loop design with Bode plots, an EMI filter estimate and an exportable bill of materials.
- System chains, for example PFC → LLC → buck, with the efficiency of the whole chain.
- Datasheet PDF import, so you can add and edit your own parts.
How to use it
- Enter your specification in the left panel: input range, output voltage, power and switching frequency.
- Results update instantly. Use the tabs to inspect waveforms, the chosen parts, magnetics and losses.
- Override any automatically chosen part, or import your own from a datasheet.
- Save the design as a file, print it, or export the BOM.
Results are engineering estimates. They use typical datasheet values and first-order switching models, and they do not replace simulation, the manufacturers’ datasheets or prototype testing. The equations used are listed under “Equations & Methods”.